• Tenda TEF1126P-24-250W 24 Port 10/100Mbps +1 GE/SFP PoE Switch

Tenda TEF1126P-24-250W 24 Port 10/100Mbps +1 GE/SFP PoE Switch


  • Brand: TENDA
  • Product Code: NPTEN-TEF112624
  • Availability: In Stock

  • PRICE: £190.68


TEF1126P-24-250W not only offers 24 10/100 Mbps Base-TX RJ45 ports, but also 1 10/100/1000 Mbps Base-T RJ45 ports and 1 1000 Mbps Base-X SFP port. Ports 1-24 comply with the IEEE 802.3af standard and 802.3at standard and each port can support a maximum PoE power output of 30 W. The switch offers a maximum PoE power output of 135 W and it can supply power when exchanging data with APs, IP cameras, and IP phones through CAT5 cables. It also provides simple management modes such as CCTV, VLAN, and Extend to help reducing cabling costs of IP terminals.

Lead security transmission power supply to a higher level
24 10/100Mbps +1 GE/SFP Slots Switch With 24-Port PoE

6KV lighting protection PoE switch is the real monitoring private switch
In real project, ap or cameras are often installed outdoor or in a higher position, which also increases the probability of lightning shock toward the cameras and PoE switches. Therefore, some of the equipments may be damaged and even the whole local area network (LAN) may be paralyzed.Tenda TEF11 series switches have professional lightning protection design ? 6KV port and power supply thunder prevents. These two protection design can effectively inhibit the lightning current from the network cable and power supply, which is equivalent to add a security Walls to the entire network monitoring system. And the test standards are far higher than the requirements of the state CCC. In the thunderstorms, the monitoring network can also provide stable and reliable services to the monitoring network and ensure the normal transmission of the images.

CCTV?Standard, VLAN and Extend Operation Modes Offered
CCTV?Standard, VLAN and Extend Operation Modes Offered
CCTV: 1-8 ports support QoS,If multiple IP cameras are connected to the switch, you are recommended to enable this mode and connect the G1 or SFP1 port of this switch to the upstream device,like the monitoring computer. This ensures smoother monitoring video playback.
Standard: The switch?s functions are similar with a common unmanaged switch?s and all the ports of the switch can communicate with each other.
VLAN: In this mode, 1-24 ports of the switch cannot communicate with each other, but can communicate with the G1 and SFP1 ports. It can be used to isolate broadcast storms and DHCP broadcasts.
Extend: In this mode, the data rate of 1-8 port is limited to 10 Mbps, whereas the maximum transmission distance of the port is increased to 250 meters. All the ports of the switch can communicate with each other.

225W PoE power supply
Ports 1-24 comply with the IEEE802.3af and IEEE802.3at power supply standards. The entire switch offers a maximum PoE power output of 225 W, whereas each port offers a maximum PoE power output of 30 W.The ports can be used to supply power to APs and IP cameras while exchange data.

Specifications

Standards and Protocol
IEEE 802.3?IEEE 802.3u?IEEE 802.3ab?IEEE 802.3x?IEEE 802.3af?IEEE 802.3at

Indicators
24*Link/Act per device
1*G1 Link/Act per device
1*SFP Link/Act per device
1*PoE-MAX per device
1*Power per device

Interface
24 10/100Base-TX ports(Data/Power)
1 10/100/1000Base-T port(Data)
1 1000Base-X SFP port

Lightning Protection
6KV

Store and Forward
Yes

Exchange Capacity
8.8 Gbit/s

Packet Forwarding Rate
6.55Mbps

MAC Address Table
4K

POE Supply Management
Port 1 to Port 16 support IEEE802.3at/af POE standard

PN Pass-Through
1 2 4 5 +,3 6 7 8 -

Input Power
AC:100-240V~ 50/60Hz

Dimensions
294*215*44mm( W x D x H )

Power Consumption
in full configuration:<250W
PoE Max Power Supply:225W

Port Features
CCTV: 1-8 ports support QoS,If multiple IP cameras are connected to the switch, you are recommended to enable this mode and connect the G1 or SFP1 port of this switch to the upstream device,like the monitoring computer. This ensures smoother monitoring video playback.
Standard: The switch?s functions are similar with a common unmanaged switch?s and all the ports of the switch can communicate with each other.
VLAN: In this mode, 1-16 ports of the switch cannot communicate with each other, but can communicate with the G1 and SFP1 ports. It can be used to isolate broadcast storms and DHCP broadcasts.
Extend: In this mode, the data rate of 1-8 port is limited to 10 Mbps, whereas the maximum transmission distance of the port is increased to 250 meters. All the ports of the switch can communicate with each other.

Environment
Operating Temperature: 0?~40? (32?~104?)
Storage Temperature: -40?~70? (-40?~158?)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing

Write a review

Note: HTML is not translated!
    Bad           Good